POSSESSEDZ
11-06-2003, 04:21 PM
WILL TRADE FOR PERFORMANCE PARTS FOR A 1996 CAMARO Z28
HERES THE LIST:
1989 PONTIAC FORMULA 350 WS6 BODY - $650.00
(WILL PART OUT IF NOT SOLD IN 2 WEEKS)
WORLD PRODUCT SPORTSMAN 2 HEADS PORTED WITH TRW VALVES & CC987 SPRINGS (NEW)- $600.00
NEW MARCH LOW MOUNT PULLEY KIT (#20231) INCLUDES LOW MOUNT BRACKET - $350.00
ZZ4 DISTRIBUTOR (NEW)- SOLD
EDELBROCK ALUMINUM WATER PUMP (NEW) - $125.00
EDELBROCK RPM INTAKE PORT MATCHED TO HEADS (NEW) - $100.00
HAMBURGER OIL PAN PAINTED BLACK (NEW) - $150.00
TH350(MISSING TAIL)needs rebuild INCLUDES CHEETHA AUTO/MANUAL VALVE BODY (NEW IN BOX) - $150.00
350 4 bolt short block bored .030 over with plates,aligned honed. components are stock crank turned, pink rods,trw pistons,total seal gapless rings,CC 280H Cam, HD timing chain,chrome timing cover , chrome harmonic balancer - $875.00
CUSTOM SUB BOX FOR 93-97 CAMARO - $125.00
irocznformula
11-06-2003, 08:20 PM
i might be interested in the 89 formy got any more details about it or pics?
email me at champion952@yahoo.com
-Nick J
jp2002ls1
11-06-2003, 08:40 PM
Whats the part number on the heads? straight plug or angled?
Dave89IROC
11-06-2003, 09:51 PM
any pics of the pulley/bracket set-up?
POSSESSEDZ
11-07-2003, 06:13 AM
Originally posted by jp2002ls1
Whats the part number on the heads? straight plug or angled?
Not sure on the part #, They are straight plug heads
POSSESSEDZ
11-07-2003, 06:23 AM
Originally posted by Dave89IROC
any pics of the pulley/bracket set-up?
Go to [URL=http://www.marchperf.com/Pg9.html]
POSSESSEDZ
11-07-2003, 11:58 AM
Originally posted by irocznformula
i might be interested in the 89 formy got any more details about it or pics?
email me at champion952@yahoo.com
-Nick J
It has a little surface rust in a few areas, roof is faided from sitting so long, Rear spoiler has looks like small stress cracks? Don't know if thats repairable, Passanger floor pan is rusted (but so is every 3rd gen. in michigan good design by GM)
Thers no motor or trans or air ducts in the car. I was setting it up for a carburated motor. If you need more details post me a message. If you need a specific Part(s) ill be willing to part it out. thanks
irocznformula
11-07-2003, 06:42 PM
Originally posted by POSSESSEDZ
It has a little surface rust in a few areas, roof is faided from sitting so long, Rear spoiler has looks like small stress cracks? Don't know if thats repairable, Passanger floor pan is rusted (but so is every 3rd gen. in michigan good design by GM)
Thers no motor or trans or air ducts in the car. I was setting it up for a carburated motor. If you need more details post me a message. If you need a specific Part(s) ill be willing to part it out. thanks
id like to know what color it is and whether were talking surface rust or rotting. and does it have t-tops, what color is the interior is it just a body shell or is it a rolling chassis.... id need more specific details to know whether im interested or not.
-Nick J
POSSESSEDZ
11-08-2003, 08:51 AM
Originally posted by irocznformula
id like to know what color it is and whether were talking surface rust or rotting. and does it have t-tops, what color is the interior is it just a body shell or is it a rolling chassis.... id need more specific details to know whether im interested or not.
-Nick J
The color is burgany with gray interior, theres only a few little areas of surface rust with sand paper you can take care of it the only major rust is passanger floor pan, I did a temporary fix with fiberglass at that time they didnt make floor pans for it, But they make them now for the 3rd gen. cars. Its a solid top no T-Tops and Its a rolling chassis. Its a good project fix the floor pan, do minor body work and paint then your done ther are no dents.