|
||
Source for mild steel header parts?SMOKNZ 10-05-2003, 09:58 PM Does anyone know of a place that sells mild steel flanges and 1 3/4" mild steel tubing in various bends as well a collector. I am looking for some parts to begin fabbing up some parts for a twin kit. Any help would be nice! Anyone have any comments about Innovative Turbo's Progate adaptor? Bill 96TurboTA 10-05-2003, 11:06 PM You don't want to try it Jordan style and use a backwards slp header? gearjammer94 10-06-2003, 01:35 AM http://www.stahlheaders.com These guys have most anything you would need. Later arnie 10-07-2003, 08:48 PM Originally posted by SMOKNZ Does anyone know of a place that sells mild steel flanges and 1 3/4" mild steel tubing in various bends as well a collector. I am looking for some parts to begin fabbing up some parts for a twin kit. What wall thickness are looking for? sleeperz28 10-09-2003, 12:42 PM Bill I did several posts on different messagebd and called several people before doing my project. From what I got out of all of it, if you plan on keeping the kit for awhile do stainless. I hurd a few guys talk about after a few years they could squeeze the primary tubes together collapsing the tube by hand:eek: I would say that 90% of those that ran mild steel had problems after a few years(2). I wanted to go budget at the time, but in the long run didnt want to have the kit fail. SMOKNZ 10-09-2003, 05:25 PM Good point. Thanks for the link, they sure have alot of tubing available, and prices are reasonable Bill | ||