WTB: NEW Direct Port N20 system...and Ported LT1 Intake, BFG Comp TA 275/17 Tires

chesee48@aol.com

How much are you looking to spend?

Originally posted by JWINN
How much are you looking to spend?
ygm

bump

up

UP

up

Cheese,

You have to let me know what your looking to spend? I personally have a LT4 direct port manifold that has been ported by Agostino Racing Engines and manifold is cut to use a monoblade throttle body, manifold is ported to use AFR 227 ports. The intake is a custome plumbed NOS Pro Race Fogger kit using stainless annualar nozzles. These nozzles are a straight shot designed that have multiple little orifices at the end. The intake has welded nitrous bungs welded to the intake runner in order to use these nozzles. The nitrous kit was then flowed and calibrated by Applied Nitrous Technology Jeff Prock whom is the #1 premier nitrous tuner in the country.

This kit is setup to shot 150 to 600+ of nitrous I also will give three tuneups with my kit 300,400,600hp. All nitrous jets where flowed and corrected for optium power setting, jets have been lazer cut and flow tested.

You will not find a more powerful single stage direct port nitrous kit out there.

I will sell this kit but obviously the price will be far from cheap because it is new never used todate and I have big money into also! When I asked you how much you want to spend that was because I have a buddy that has a direct port that he is selling and he asked me to see if I could find someone to purchase it. I'm running any offer past him.

Let me know how much you have to work with because he is looking for around asking price $1700.00 and the nitrous kit is also a NOS Fogger using fogger 2 nozzles. If your interested in my intake here are a few shots of it when it was new prior to being ported from ARE:


www.gofastzone.com/members/The_KING/mvc-377s1.jpg

www.gofastzone.com/members/The_KING/mvc-378s1.jpg

Thanks again,
Jim

you got a Pm

up

up

up

up

I have LT1 ported intake. It has ported (gasket matched) intake ports and it will accept all TB: stock, 52mm, 58, and mono blade...The intake was sandblasted and it looks like new!!! I need to get $200 (shipped) for it or $150 + your stock intake (you will pay shipping for your intake)
Thanks

Chect this out

http://web.camaross.com/forums/showthread.php?threadid=200813&referrerid=6718

up

up

up

UP

up

Catch me on AIM. I also have a set off ported Heads that just came of my car. These heads are not junk !!

i dont need heads? :confused:

up

up

up

up

I'll sell ya mine for $3,000.00 includes flowed jets,intake,three tuneups from Jeff Prock at Applied nitrous Technologies ported ARE LT4 Intake and intake is setup to use a mono blade throttlebody. See picture above.

You not going to find a direct port system like this as it is a custom setup from Jeff Prock with the trick annular stainless nozzles with the welded bungs. This intake will adjust from 50 to 600hp.