I just purchased an NX kit, but after seeing this 'The Nitrous Works' (Summit p/n TNW-13070) kit with bolt-in spray bar/TB plate and the rest of the usual goodies for $550 I'm having second thoughts.

Anyone familiar with this kit?

------------------
Dave
White 96 Trans Am M6
Hooker LTs, custom 3" y-pipe, MAF descreen, Ported MAF ends, LT4 KM, 1LE elbow, front Powerslots, shortened Pro 5.0, BMR STB, PHR & SFCs, SLP Loudmouth, Clutch/PP & CAI, !CAGS, NGK TR55s, Taylor wires, Konig Monsoons, MAC overdrive and March underdrive pulleys, ES poly tranny mount, Harlan shift light
*No times on Nittos yet...

 

Trust me stick with what you have. I sold my Nitrous Works kit. People say the NX is way better. The solenoids are 3 times bigger also.

Jason

 

I had the NW kit,was good,but NX is MUCH better.
I was running 12.02 with a 100 shot on the NW plate setup,talked to John Phillips from NX and decided to buy their nozzle/solenoids/jets. I swapped over,ran the SAME 100 NW jets,and car went 11.8's.
I then then put the NX 125 jets in and couldnt hook the car and it went a Spinning 11.6.
Im pretty much sold on the NX kit,if you want the NW Plate,i have it and the solenoids for sale.

------------------
Dirk
1997 TA A4
11.251@119.3 1.52 60',7.132@95.39 1/8
The RacinLT1
RacinLT1 pic's

 

I'm happy with my nw kit. Although I have heard that nx puts down more power than nitrous works kit.

------------------
93 T.A. m6
4.10's,1.6 rockers,msd 6al, cai,edelbrock shorty's,flows,cutout,hypertech,hurst,short stick,airfoil,tb bypass, star stage 3 carbon and a 125 shot

 

Racinlt1- Just out of curiosity, how much was it for the selenoids, nozzle, etc?

------------------
93 T.A. m6
4.10's,1.6 rockers,msd 6al, cai,edelbrock shorty's,flows,cutout,hypertech,hurst,short stick,airfoil,tb bypass, star stage 3 carbon and a 125 shot

 

If my memory serves me right(which would be a first) it was just under 300 for the 2 solenoids,nozzle,and a bunch of jets. Dont quote me,cause it was over a year ago.

 

Well good to hear people backing my choice. It will be here tomorrow - i can't wait to embrace its goodness


mmm....naawwzzz hehehe I hear if I get 2 bottles it will double the hp output! (j/k)

------------------
Dave
White 96 Trans Am M6
Hooker LTs, custom 3" y-pipe, MAF descreen, Ported MAF ends, LT4 KM, 1LE elbow, front Powerslots, shortened Pro 5.0, BMR STB, PHR & SFCs, SLP Loudmouth, Clutch/PP & CAI, !CAGS, NGK TR55s, Taylor wires, Konig Monsoons, MAC overdrive and March underdrive pulleys, ES poly tranny mount, Harlan shift light
*No times on Nittos yet...