MBonZ28
06-04-2002, 06:28 AM
How many amps do the Nitrous solenoids pull? Also how many amps does the heater pull?
------------------
Matt Bonventre
Motown Muscle Officer
www.motownmuscle.com
1997 Z28 Drop Top M6
STILL bolt ons
STILL stock long block
STILL stock suspension and gears
13.048@106.39
onebad82z
06-04-2002, 02:51 PM
Fuel noid usually pulls around 5-7 amps..n2o noid usually around 30-35 I beleive.It's been awhile since I read the instructions but this is what I seem to remember.Heater I have no idea,need to get one though.
------------------
'82 Z28
355,4 speed,misc bolt ons..
rpm4lalo
06-04-2002, 10:39 PM
I was told 25 for the nitrous solenoid, but now i need some reaasurance, can some one else chime in with the facts? http://web.camaross.com/bb/smile.gif
------------------
Lalo
95 TA
"It will never be fast enough."
I have NX ICEMAN solenoids and the fuel & nitrous are both running off of 1 relay. And that relay is powered by a 30 amp fuse. So it has to be less than 30 amps combined.
Reid
------------------
1997 Z28 A4 3:73's
1971 SS Restoration
------------------
Bests
60'-1.82 (ET's)
1/8-8.11
1/4-12.28 (Radials)
MPH-119 (Radials)
This years plan....11's!!
My Home Page (http://www.angelfire.com/bc/sscamaro) My Videos Page (http://www.angelfire.com/bc/sscamaro/videos)
Damn.. 25 amps @ 14V.. so you are saying that the nitrous solenoid needs 350 watts of power?
Racing
06-09-2002, 11:04 AM
Bigshot and the big fogger noids and such draw 16 amps.
The smaller sportsman series noids pull a mere 7-8.
Fuel noids-fuggedaboutit.
We´re in the 2-4 range there