|
||
Check out WWW.PORTPROS.COM !!!fast 93 z 09-15-2003, 10:55 PM New guy in our area.......professional head machinist and head porter. Has all the newest flow benches and machinery! Has many years of experience. Just did some work on my heads and I am very impressed! Can make LT1 heads flow at or close to 300 cfm....even above that with a little more dinero$. Also has mastered the LS1 head! Give Harold a call at Port Pros! Tony Shepherd www.portpros.com 350SS 09-16-2003, 01:34 AM So what do your heads flow? fast 93 z 09-16-2003, 09:56 PM Mine are flowing 285 @ 600 lift.........should be higher at 700 lift. But......my heads were already worked over before he touched them.....for what he had to work with....he did a good job!! He prefers to have untouched heads when you bring them in!! fast 93 z 09-17-2003, 09:25 PM By The Way!!! His prices are much cheaper than other companies!! AdioSS 09-18-2003, 12:02 AM Originally posted by fast 93 z Mine are flowing 285 @ 600 lift.........should be higher at 700 lift. But how much valve lift do you have? fast 93 z 09-18-2003, 04:42 PM Depends on what cam I use!! fast 93 z 09-21-2003, 01:37 AM TTT one more time!!! FacelessZ 09-22-2003, 03:39 PM how does this guy compare to Lloyd? | ||