LSD?

How hard is it to put and LSD in my car?(95 3.4) Where can I get one from? Thanks

I got a Z28 take-off one from SLP for $100 but I had a gear shop install it, I wouldn't want to mess around with something like that.

------------------
'96 3.8 M5
Flowmaster 2.5" catback
SLP CAI
SLP takeoff LSD
Z28 driveshaft
clear corners
15.236@91.77
my car (http://www.geocities.com/sbking06/Camaro_page.html?1014543180740)

Can you link me the product on SLP's website? Thanks

TTT, anyone?

do a search on the SLP site for 'zexel'...

------------------
1995 Camaro 3.4 M5
Custom Cold/Ram Air
Flowmaster 80
MAC progressive springs
17x9.5 ZR-1 Replicas with 275/40 BFG G-Force KDWS
and some cool electrical stuff, my 'camaro' lights up... check it out at:
http://scammper.fbody.com

ok... I did it for you
http://www.slponline.com/view_product.asp?PARTNUMBER=64501T

So this is all I need, for the LSD? Just bring it to a shop and get them to put it in? Thanks

Make sure to get the lsd additive, you NEED to run it (about $7 at a gm dealership). If you are going to have an lsd installed you might as well get more agressive gears and have them installed at the same time (don't get 3.42s, get 3.73s, I got the 42s and regret it).

Good Luck!

------------------
Jeff R.
http://camaro.rscpro.com
97 RED RS, intake, exhaust, suspension, and sound.

I did my own a few years back - took 4-6 hours (it was cold, and the fluid was flowing like molasas) Was very happy with the results.

The install is not that complex, you cant really break anything. At least not without trying, or having broke a mirror in the last 7 years.


[This message has been edited by James Montigny (edited August 09, 2002).]