JETHOT LT1 header GP is back!

Sorry for the delay in starting a NEW LT1 header GP, we just received the header again. We were out of stock for some time.

Jet Hot is offering the LT1 long tube headers for the 93-97 LT1 Camaro/Firebird. The headers are long tube with 1 3/4x3" collectors. The headers have the O2 bungs installed into the collectors. The headers are a 16 gauge metal and 3/8" flange thickness. The flange is weled on both sides and has a smooth matting surface for better sealing. The headers are fully coated in&out with the sterling silver finish. The headers get a lifetime corrosion warranty and a 3yr finish warranty.

We also offer the headers for the 94-97 cars with the emission tubes.

The price of the headers,fully coated with the sterling silver finish,is $529 to the door(within the U.S.).

Keep in mind, the 2 pay plan is always an option.

Please feel free to call or email with any questions.

Thanks
Chris
1-800-432-3379 ext 110

chris@jet-hot.com

PS: the GP will run from 8/18/03 to 8/29/03

Do I need 02 extensions with these headers, or will the stock wires work?

Is the two pay plan the same price or is there an extra charge?

Some people have streched the stockers, Jet-Hot suggests 24" extenders.

And as far as I'm aware no price difference.

Not speaking for ya Chris just trying to give these people something to chew on while they wait for a response. :D

Oh yeah and I'm finally installing my LTs tomarrow! THANX AGAIN CHRIS! :bow:

Count me in! I'll give you guys a call sometime this week.

Originally posted by speed_demon24
Do I need 02 extensions with these headers, or will the stock wires work?
I used O2 extensions for both passenger side and driver side O2s. Stretching the stockers to me is more trouble than its worth and I didnt feel like ripping something out but it can be done.

Sorry, but 1 more question, do they come with gaskets?

Does JetHot plan to have a y-pipe setup for these headers? Just wondering... I guess the Hooker Y-pipe that has been posted will fit this setup, right? I am going to place my order for the Jet Hots before the end of the month if nothing else pops up.........:D

Originally posted by podany24
Is the two pay plan the same price or is there an extra charge?

With the two pay plan, you pay the same price.

Thanks
Chris
chris@jet-hot.com

Originally posted by speed_demon24
Do I need 02 extensions with these headers, or will the stock wires work?


I see that some people have answered to this question and they are right, you do not have to get the O2 ext wires. But we do offer the Pair of O2 ext wires for $30.

Thanks
Chris
chris@jet-hot.com

Originally posted by speed_demon24
Sorry, but 1 more question, do they come with gaskets?

In the box with the headers, you are to get the standard bolts and paper gaskets.

Thanks
Chris
chris@jet-hot.com

Originally posted by curly
Does JetHot plan to have a y-pipe setup for these headers? Just wondering... I guess the Hooker Y-pipe that has been posted will fit this setup, right? I am going to place my order for the Jet Hots before the end of the month if nothing else pops up.........:D

Jet Hot is working on a Ypipe (with and without the cats). We just finished the Y pipe for the LS1 and should have the LT1 Y pipe ready this fall. Any Y pipe on the market that works with the Hoker headers will work with the Jet Hot LT1 headers.
Thanks
Chris
chris@jet-hot.com

Chris worked with me when I sent my Hooker LTs in to be coated.
Great customer service and he even answered Emails quickly.
Jet Hot is one of the best companies I have had the pleasure to work with so far.
Thanks Chris.

Originally posted by revtime
Chris worked with me when I sent my Hooker LTs in to be coated.
Great customer service and he even answered Emails quickly.
Jet Hot is one of the best companies I have had the pleasure to work with so far.
Thanks Chris.

THANK YOU!
Chris
Chris@jet-hot.com

what is the 2 pay plan?

what is the 2 pay plan?


You pay half upfront and they send out the headers and pay the rest later... Although Chris hasn't taken my other half yet :confused:

Originally posted by ibanez6rg



You pay half upfront and they send out the headers and pay the rest later... Although Chris hasn't taken my other half yet :confused: [/B]


You are correct. You pay 1/2 by credit card and we ship the parts out to you. We then charge the card the following month on teh same date.

Thanks
Chris
chris@jet-hot.com
PS: If you (ibanez6rg)wanted to email me your name and zip code about the 2nd payment not being done, I'll find out why.

hey, how much are the headers if you wouldn't get them from the group purchase?

i need them for a 97 lt1 with emission hook ups. any exhaust shop should be able to custom fab a y-pipe to connect the headers to any cat back exhaust right?

Originally posted by JetHot Coating
PS: If you (ibanez6rg)wanted to email me your name and zip code about the 2nd payment not being done, I'll find out why.

Well, I haven't had mine a month yet so I understand now :)

Thanks

Originally posted by Mystic97Z
hey, how much are the headers if you wouldn't get them from the group purchase?

i need them for a 97 lt1 with emission hook ups. any exhaust shop should be able to custom fab a y-pipe to connect the headers to any cat back exhaust right?

The normal price for the internet members is $560 to the door.
Thanks
Chris
chris@jet-hot.com

i would just like to put my two cents in on jet hot they have excellent customer if you have any problems they are sure to take care of you. thanks chris and they are beautiful headers also

Any word on the 93's with emissions? I can drive to tempe if you need a test car.

Originally posted by jasycZ28
Any word on the 93's with emissions? I can drive to tempe if you need a test car.

If it was only as easy as driving down the the AZ plant. I appreciate your offer. I'm sorry to say, we haven't been able to move on to that project untill the LT1 Y pipe project is finished. Our pant to manufacture the headers is not located in AZ.

Thanks
Chris
chris@jet-hot.com

We, I was finally able to get Jet Hot's price on the new Hooker Y pipe for the long tube headers. Hooker part number 16765 will work with the Jet Hot headers. We can only offer it as coated. The price of the Hooker Y pipe,fully coated in&out with the sterling silver finish ,is $209+$20s&h to the door. Of course ,it would get the lifetime corrosion warranty and 3 yr finish warranty.

I spoke with Hooker and they have a limited quanity so order quickly. We will be looking to stock some when Hooker stocks more. The normaly price for the Y pipe will run $268 with the s&h.

If there are any questions, please feel free to call or email me.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

of course go ahead and put me down for a set chris i will send a money order in the next few days as my CC is maxed at moment

Chris,
Would you recommend the Hooker Y-pipe or the Mufflex Y-pipe for the combination? Is there any way you could offer a package deal with the Mufflex (coated, of course)? How long before your y-pipe will be out? I will have some time after I get the headers and y-pipe until the time when it is installed. I might wait for the Jet-hot y-pipe to complete the setup. I have read both will work but I am unsure of which to go with.... anyone else have any experiences with either?

Thanks,
Stephen

Originally posted by curly
Chris,
Would you recommend the Hooker Y-pipe or the Mufflex Y-pipe for the combination?

I just spoke with Chris and ordered the Hooker Y-pipe. I believe he told me that the Hooker actually had a "dent" in the area of the driver's side header for better clearence of the tranny crossmember! :D :thumb:

Originally posted by curly
Chris,
Would you recommend the Hooker Y-pipe or the Mufflex Y-pipe for the combination? Is there any way you could offer a package deal with the Mufflex (coated, of course)? How long before your y-pipe will be out? I will have some time after I get the headers and y-pipe until the time when it is installed. I might wait for the Jet-hot y-pipe to complete the setup. I have read both will work but I am unsure of which to go with.... anyone else have any experiences with either?

Thanks,
Stephen

I did try a long time ago to run a GP with the Mufflex Y pipe. I didn't get enough orders and then found out that many people weren't happy with the Mufflex Y pipe. We ordered what Hooker had left in stock (8 Y pipes). I couldn't find out how long before they get more. We are still working on the Jet Hot Y pipe for the LT1, it should be ready this fall.

Thanks
Chris
chris@jet-hot.com

Originally posted by JetHot Coating
I did try a long time ago to run a GP with the Mufflex Y pipe. I didn't get enough orders and then found out that many people weren't happy with the Mufflex Y pipe. We ordered what Hooker had left in stock (8 Y pipes). I couldn't find out how long before they get more. We are still working on the Jet Hot Y pipe for the LT1, it should be ready this fall.

Thanks
Chris
chris@jet-hot.com


do you have any more details on the hooker y-pipe? i've googled and searched this board for the part number and found nothing.

Originally posted by anasazi
do you have any more details on the hooker y-pipe? i've googled and searched this board for the part number and found nothing.

I haven't been able to get a picture on the web yet. I spoke with hooker about the design. I was informed it has a 1 peice design and is 3" all the way though. The pipe bolts up the the headers and slides into the exhaust system and is secured by a band clamp. Hooker put a dent about 5" long on the top of the pipe to clear the trans mount on the driver's side. Once I get one in for coating(by 8/22 or 8/25), I can get a picture of a coated Y pipe and post it.

Thanks
Chris
chris@jet-hot.com

I got my headers :bow: and I got the y-pipe from speedinc, quality seems great on both products. If you want to see pics of the y-pipe, just check out speedinc's post.

The hooker y-pipe does not connect to the collectors, it's too wide. :mad: I'm going to have to drive it to a muffler shop and have it narrowed up. :(