West North Central Iowa, Kansas, Minnesota, Missouri, Nebraska, North Dakota, and South Dakota

the Fort people this weekend

Thread Tools
 
Search this Thread
 
Old Aug 7, 2003 | 12:45 PM
  #1  
ltwonz's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 411
From: Ft. Wayne, IN
the Fort people this weekend

I was wondering in anyone is going to be out this weekend? The weather looks to be good and I plan on being out Friday, Saturday or possible both. We could all even meet up at hooters saturday night.
Old Aug 8, 2003 | 01:54 AM
  #2  
Teal94Z's Avatar
Registered User
 
Joined: Sep 2001
Posts: 569
From: Southern California
If the Z was running right, I would be up there
Old Aug 9, 2003 | 11:03 AM
  #3  
ltwonz's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 411
From: Ft. Wayne, IN
Luke: What did you end up getting and what all is wrong with the car?
Old Aug 11, 2003 | 03:44 PM
  #4  
Teal94Z's Avatar
Registered User
 
Joined: Sep 2001
Posts: 569
From: Southern California
I traded the bike straight up for a ZR28, came with a lot of stuff, its a rebuilt 355, new tranny, etc. Full exhaust with the hotcam kit, I have replaced everything in the ignition, so right now I am working on the fuel system, it will barely start at all, it will fire, and when it does if I hold the throttle, it will fire on about 6 cylinders, then after it revs over 3k, it will fire on 8, and idle, and run fine. So in a day or 2 I am gonna check the fuel pressure, and go from there. Either I have some bad injectors, FPR, or if worse comes to worse, the fuel pump...
Old Aug 12, 2003 | 01:16 PM
  #5  
ltwonz's Avatar
Thread Starter
Registered User
 
Joined: Dec 2002
Posts: 411
From: Ft. Wayne, IN
I hope you get it running good soon. If you need any help I should be able to swing down and give you a hand.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
Z Power
LT1 Based Engine Tech
8
Sep 19, 2015 11:19 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Sep 18, 2015 03:46 PM
RX Speed Works
Supporting Vendor Group Purchases and Sales
0
Sep 11, 2015 03:31 PM
z28newbie
Site Help and Suggestions
1
Sep 9, 2015 10:26 AM




All times are GMT -5. The time now is 08:47 PM.