Selling a set of brand new LS1 castings that were fully CNC ported. These heads are a killer setup, the valves are stainless with undercut stems on both intake and exhaust, valve sizes are 2.02/1.60, chambers are profiled and polished. Valve springs are good for over .600 lift, Titanium retainers and forged locks. These heads were never on the motor, they are not used cores then ported, they started out as brand new GM castings. I have flow data for them as well, at .600 lift the flow 318 intake and 225 exhaust.
I sold the car so have no need for them, i'm selling them out right so your saving alot with no core here!
First $1,600 takes them.

Located in NJ
Thanks

 

Still have the heads

 

still have these heads

 

sent out emails,,,will take 1,400 for these heads, they must go

 

Still have these heads, serious replys only, thanks