shaft rocker valve cover search continues

I'm going to try these: http://www.stefs.com/bb/39.htm. The salesguy sez they clear Jesel shafties, wasn't sure about T&D, but was pretty sure I'll have alternator clearance problems. $162 plus $UPS

These did not clear the shafties: http://www.melroset-tops.com/Covers1color.jpg

These are stock height: http://www.carboncomponents.com/cc2.html

Moroso 68025 need serious surgery to clear alternator (and they're $350!): http://www.moroso.com/catalog/categorydisplay.asp?catcode=37400

Billet Specialties are stock height, as are most of the other cast covers out there.

These are the vlave covers I wanted TALL COVERS (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2421180567&category=6769) .


But these are the ones I got MORE TALL COVERS (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2421167441&category=33627) .

If you do an ebaymotors search for valve center, there are a few different styles there.

My alternator is located on the bottom so I had no worries about clearence.

I believe mine are Moroso...they were modified by a guy on here ( I forgot his name) to clear the alternator and they clear the T&D rockers, no problem.


I'll try to get some pics up here in the next couple days.

I am stumped too! I have a set of AFR 220s and the Jesel Competition shaft mounts (1.65s) and have tried several different valve covers without luck. Please keep me in mind if you find a solution that doesn't require fabrication.