5H9D0W
06-30-2003, 02:43 PM
I'm thinking about hooking a 100-150 shot to my car.Can I see some pics of some of your set-ups.What would be the best kit to buy,NOS,TNT,NX and so on.Dry,Wet.What kind of quarter mile gains did you guys pick up w/ a 100 shot.Mike
craigffb
06-30-2003, 10:23 PM
I have a NX wet kit. This should help a bit.
NX wet kit install (http://www.geocities.com/formulapower2/nxinstall.html)
11 sec gta
07-01-2003, 07:32 AM
NX & TNT are the same kits with 2 key differences:
NX's rwhp is within 2% of the advertised power.
TNT's rwhp is about 20% higher than the advertised power. (through skewed jetting)
TNT uses a dual fogger nozzle setup, NX uses a single nozzle fogger.
I prefer NX kits.
www.eden.rutgers.edu/~bhawalka/new1.JPG
kirschman
07-01-2003, 04:35 PM
noids..http://gallery8926.fotopic.net/photo.php?o=1&id=550124 bottle in spare tire well...http://gallery8926.fotopic.net/photo.php?o=1&id=550130 MSD ignition..http://gallery8926.fotopic.net/photo.php?o=1&id=550125
looks good, except your bottle doesn't looks like it's mounted correctly. The angle from level ground is to steep, in the directions it has the angle that it should be mounted at, do u have any problem with getting all the nitrous out of it???
kirschman
07-01-2003, 09:58 PM
Nope, everytime I refill it takes bout 9-10lbs. to bring it up to 11 when I freeze the bottle. I'm satisfied, no surging. Took no time to install, didnt need to buy any thing. It might not look as good as others but it serves its purpose for me:cool:
Slow95T/A
07-02-2003, 12:23 PM
kirschman
why do you freeze the bootle?
FirehawkNS
07-02-2003, 05:00 PM
Since mine is a LS1 I will just put the pick of the bottle mounted in the tire well. Only change now from the pic is I now have a NOS Remote Bottle opener
http://venomoussvt.com/pewterz28/images/nos_install2.jpg
How I got to it before the remote bottle opener
http://venomoussvt.com/pewterz28/images/nos_install5.jpg
Check sig for more pics!!!
burnemonm1
07-02-2003, 05:09 PM
is it hard to mount it in the tire well I'm getting my system tomorrow and was just wondering the best and easiest ways for the bottle mount
kirschman
07-03-2003, 02:02 AM
If u got a cooler full of ice handy put the bottle in it bout and hour or so before u get it filled. The metal will shrink and u can get more than 10lb. in it. I've had as much as 11.75 in mine before.
11 sec gta
07-03-2003, 10:25 AM
refillers that don't have the pump freeze bottles so it will "suck in" the nitrous during filling.
Pumps kick ass... nothing like stuffing 20lbs in a 15lb bottle ;)
'94 Bad A Z28
07-03-2003, 05:04 PM
Originally posted by 11 sec gta
NX & TNT are the same kits with 2 key differences:
NX's rwhp is within 2% of the advertised power.
TNT's rwhp is about 20% higher than the advertised power. (through skewed jetting)
TNT uses a dual fogger nozzle setup, NX uses a single nozzle fogger.
I prefer NX kits.
You have like a million different names on messagesboards. :p
11 sec gta
07-03-2003, 08:27 PM
Originally posted by '94 Bad A Z28
You have like a million different names on messagesboards. :p
Yup. And you postwhore on every one of them.