WhoBetter?
06-24-2002, 09:59 PM
i can't find anything above 2-1/4" with an adjustment cable so what does everyone reccomned? i don't want t spend $120 for an electric set-up.
|
||
where to get decent cutout?jorgez28 06-24-2002, 10:07 PM just get a manual one from summit racng or jegs for around 30$. ------------------ 94 z28 Flowmaster catback Slp cold air New LT1 crate motor 1le tranny mount Cut-Out and redline water wetter. TBB! LT4,KM Just like Chucky !!! WhoBetter? 06-24-2002, 10:17 PM okay, here's something else, i went to midus and monroe and they both want $80 to weld one on??? you all are always saying you can find places to do it for $30, where do you all go? plain welding shops or noname muffler shops or what? ExMustangOwner 06-25-2002, 01:59 AM The best places are a little no name shop in the ghetto. They'll do most anything for cheap. Also, they're pretty nice about things while big name shops can be dicks to younger people. ------------------ J.J. (Nashville, TN) 2001 Camaro Z28 M6 (http://www.geocities.com/knightshade007/) mcflyz28 06-25-2002, 09:31 PM little no name shop made it and installed it $65. ------------------ 99 Z-28 Convertible,M-6 Loaded xcept CD Changer B&M Ripper Shifter Flowmaster 80 Series 2.2K .5 Watt CAGS Killer FRA Mod,EGR Mod,ported and Descreened MAF,SLP Lid,BMR STB,SFC's Eric @ DMS 06-26-2002, 01:17 AM Installation shouldn't cost a lot. Go to a smaller shop. They'll be happy to install one for you. We also carry cutouts. If you're interested drop me an email. Our cutouts are $29.99 + shipping. http://web.camaross.com/bb/smile.gif ------------------ Eric Cuaresma - CamaroZ28.com Sponsor! President/Co-owner of Dynamic Motorsports, LLC (DMS) "Leaving the competition behind..." Website: http://www.dynamicmotorsports.com Email: eric@dynamicmotorsports.com - A performance company by performance enthusiasts FOR performance enthusiasts! WE WORK TOWARDS HELPING YOU, NOT TOWARDS MAKING MONEY! R377 06-28-2002, 10:05 AM <font face="Verdana, Arial" size="2">Originally posted by WhoBetter?: okay, here's something else, i went to midus and monroe and they both want $80 to weld one on??? you all are always saying you can find places to do it for $30, where do you all go? plain welding shops or noname muffler shops or what?</font> I just got a Zed cutout fabbed and welded for $50 CDN, or about $35 US. It was done at Meineke. ------------------ 2000 Z28, Arctic White, Ebony leather, A4, 2.73, RS-A, 13.3 @ 105.9 stock | ||
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.