2nd Jet-hot LT gp?

I didn't have the funds last time the gp came around but I do now. Anyone else want to get in on another gp?

I'm all for it. Funds are looking good right now :)

How much would they be including the GP? will the price go down more if we get more than 5 or 6 or whatever? the Y-pipe still isnt ready yet i imagine, so would you be able to offer the Hooker Y-pipe coated and non-coated in this GP too or no? do you guys except debit cards or money orders because i dont have a credit card?

Thanks,
Jake

I'm down for the count on this.

Jet Hot just ended a GP not to long ago. If I can get at least 5 people togther, I can do a GP for a week. I can offer the Jet Hot LT1 headers with the O2 bungs welded into the collectors, fully coated in&out with the sterling silver finish,for $493 to the door. I can offer the same headers but with the emission tubes for the 94-97 cars for $513 to the door. It looks like there is almost five people, just a few more and I can start the GP.

Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

Chris, what do u suggest we use for the y-pipe? what other things will i need to pass emissions - will i need new O2 simms/sensors or nething else? any help would be appreciated.

Thanks,
Jake

My question is...From the end of the GP, how long does it take for the products to get here? Or how long before you ship the product?

Originally posted by Jcb890
Chris, what do u suggest we use for the y-pipe? what other things will i need to pass emissions - will i need new O2 simms/sensors or nething else? any help would be appreciated.

Thanks,
Jake

We designed the headers so that the collectors/flange are in the same location/set up as the hooker headers(#2231). Any Y pipes on the market will work with the Jet Hot LT1 headers. I know Mufflex sells a Y pipe and if you look at Jegs, you'll see stainless works has now come out with one. Our Y pipe should be ready late summer.

Thanks
Chris
chris@jet-hot.com

Originally posted by Anticz28
My question is...From the end of the GP, how long does it take for the products to get here? Or how long before you ship the product?


Since we have the headers in stock,once the order is placed the parts are shipped out within 2 days.

Thanks
Chris
chris@jet-hot.com

Chris, this may be a dumb question, but i have heard the term "offroad y-pipe". what exectly is an offroad y-pipe? does the offroad y-pipe not come w/ a cat or something?

Thanks,
Jake

Originally posted by Jcb890
Chris, this may be a dumb question, but i have heard the term "offroad y-pipe". what exectly is an offroad y-pipe? does the offroad y-pipe not come w/ a cat or something?

Thanks,
Jake

The Off road Y pipe means that there isn't any cats in the Y pipe. We are working on a Y pipe with cats but it won't be ready till late summer.
Thanks
Chris
chris@jet-hot.com

are there companies that sell y-pipes w/ a cat? which one would you recommend?

Thanks a lot for all the help,
Jake

I get my car out of the shop on Monday and won't have barely any money until 2 weeks from 30th. So is there anyway we can wait and see if this thread gets a little more people involved? I will have sufficient funds on the 14th!

Cool, I get paid monday :)

How much will this dual cat Y end up costing?

Originally posted by ibanez6rg
I get my car out of the shop on Monday and won't have barely any money until 2 weeks from 30th. So is there anyway we can wait and see if this thread gets a little more people involved? I will have sufficient funds on the 14th!


You have mail.

Thanks
Chris
chris@jet-hot.com

As it stands, I have 5 people interested now (both by email and who have called me). I can run a GP stating now and running untill 07/03/03.

The headers are full length with 1 3/4x3" collectors and a 3 bolt flange at the end. The headers are 16 gauge tubes with a 3/8" thick flange. The flange is welded on both sides and the matting surface to the head is smooth(no tubes pushed though). The headers come with the paper gaskest and bolts. The headers have the O2 bungs welded into the collectors.

Jet Hot LT1 headers(93-97), fully coated in&out with the sterling silver finish,for $468+$25s&h to the door(within the U.S.).

Jet Hot LT1 headers(94-97) WITH THE EMISSION tubes,fully coated in&out with the sterling silver finish, is $488+$25s&h to the door(within the U.S.).

We also have the O2 ext wires. We can offer the pair of O2 ext wires for $30.

The two pay plan is always an option. Pay half by credit(or debit) card now and the parts are shipped right out. We would charge the 2nd half the folowing month. Pay all at once or in 2 payments, it's the same price.

If you have any questions or wish to place an order, please call me at 1-800-432-3379 ext 110(or ask for Chris).


Thanks
Chris
chris@jet-hot.com

I'm in the same situation as another member who posted above. I just started a new job a couple of weeks ago and won't recieve my first paycheck until July 15th. I am DEFINATELY going to purchase the LT1 coated longtubes with O2 extensions as soon as I get my paycheck. Is there anyway to extend the Gp or anything like that. I would buy today if I could, but I just will not hae the money until the 15th:(:(

Thanks.
Email: mself@vt.edu

You have mail.

Thanks
Chris
chris@jet-hot.com

Chris, for those of us who need to pass emissions with these headers, will we/i need the have those O2 ext. wires?

Think maybe we could extend the ending date of the GP a little to include the other guys and give others some time to get 2gether some money?:D

Thanks,
Jake

P.S. Chris, i have read a lot of ur posts on here and ur a darn good guy. you always try and answer questions, give good deals, and u guys have great customer service from what ive seen, those r my biggest reasons that i am chosing to go w/ Jet Hot LTs.

Originally posted by Jcb890
Chris, for those of us who need to pass emissions with these headers, will we/i need the have those O2 ext. wires?

Think maybe we could extend the ending date of the GP a little to include the other guys and give others some time to get 2gether some money?:D

Thanks,
Jake

P.S. Chris, i have read a lot of ur posts on here and ur a darn good guy. you always try and answer questions, give good deals, and u guys have great customer service from what ive seen, those r my biggest reasons that i am chosing to go w/ Jet Hot LTs.

The O2 bungs are welded into the collectors. Unless the harnest is extended, the O2 ext wires would be needed.

I did work with the other two who needed the headers but couldn't do the order until after the 3rd. If anyone can't do the GP right now, please call or email me. I can set up a quote with your name,address and phone number. When you are ready, you can contact me and get the same GP price. I just need to show that the order was done during the time of the GP.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

hey matt, i see you're getting these LTs huh? I'm thinking about jumping into this GP myself. I just need to talk to Chris about some of my financing I just started working at Echostar here in the burg. Not bad money, but still waiting for a paycheck (july 4th). but the 2 pay plan may deffianetely make things work. =)

Hey Chris,

I'm in man, providing the guy pays for my LTs, I should have the cash. I'll let you know. I will be needing 94-95s with the smog taps.

Neil

Originally posted by Izod
hey matt, i see you're getting these LTs huh? I'm thinking about jumping into this GP myself. I just need to talk to Chris about some of my financing I just started working at Echostar here in the burg. Not bad money, but still waiting for a paycheck (july 4th). but the 2 pay plan may deffianetely make things work. =)

IZOD!! Haven't heard from you in a while! I'm in on the GP for the headers, yeap. Still want those MACS?:) Also, I'm obviously keeping the car, so I'm looking for a bigger cam. Something along the lines of a xe 230/236. Ditched the N2O completely by the way, staying NA. I'm waiting for my first check to(July 15th:(). I just started working here at the national institute of health. I think i'm going to go with the two pay plan as well so i can order my cam and headers all at once with the first check then pay them off with the second check as well as getting my heads ported by Lloyd Elliot. Hopefully it will all be back together before school!:alert:

Unfortunately im not going to b able to get in on this.:( :cry:

Jake

i'm intrested, ls1 though. Also looking into no air fitting, since the o2's don't have egr on the headers.

ok never mind, didn't realize it was for lt1's, what about us ls1 boys.

These are nice headers I got in on the first GP if any wants to see what they are getting check out my site in sig I think they are on page4 or somethin

Originally posted by redz_02
i'm intrested, ls1 though. Also looking into no air fitting, since the o2's don't have egr on the headers.

ok never mind, didn't realize it was for lt1's, what about us ls1 boys.

We did run a GP on the LS1 headers a while ago. I can offer the Jet Hot LS1 headers for the 2002 with the correct emission hook ups, fully coated in&out with the sterling silver finish,for $560 to the door. PLease feel free to call or email me.
Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

Chris,
I am also interested in the LS1 Headers, I saw that you posted about the 2002s but mine is a 98, would that still stand.. should I just give you a call??

Tim

Originally posted by BackInBlackWS6
Chris,
I am also interested in the LS1 Headers, I saw that you posted about the 2002s but mine is a 98, would that still stand.. should I just give you a call??

Tim

We do carry the LS1 headers with the correct set up for the emission tubes for the 98-99 LS1. The price for those headers,fully coated ,is $560. PLease call me at 1-800-432-3379 ext 110 if you would like to place an order for those headers.
Thanks
Chris
chris@jet-hot.com

Let's try to keep this thread only about LT1 headers. His email and phone # are all over the place, if you have questions about the LS1 headers! ;);)

Originally posted by ibanez6rg
Let's try to keep this thread only about LT1 headers. His email and phone # are all over the place, if you have questions about the LS1 headers! ;);)

Sorry for my mistake seeing as the title of the thread said "2nd Jet-hot LT gp" . I understand now that it is LT1 only, sorry for taking up your space!!

:p

Well if one reads the thread one will find out it's LT1, now get outta my space! :D

It's cool, it just might be confusing going back and forth from LT1 to LS1!

i just order my set

why's everyone always gotta be hatin :D . Chris, let me go get my phone.

Whoohoo! I'm in on this too (nwdanner)! :cool:

Chris, when that y-pipe + twin-cat setup is available please make sure you run a group purchase. I'm sure there are a lot of us who are just waiting for you to release that product... :thumb:

Sorry for wasting 5 seconds of your time by making you read this LT1 guys. But Is there a preferred ORY pipe that I could use with these?

My friend's over and was just wondering when the stuff is supposed to be delivered. Thanks, Sean.

Jet-Hot has excellent customer service and a fast deliver time... About 1 - 1.5 weeks - Not Bad at all! I got mine from the last GP and they're going on within a week. Headers look GREAT, hope they produce some nice extra HP. Thanks guys!

Chris, I know im a little late here, but you think I can still get in on this! I just fell into some money and wouldnt mind giving it to you :D

Originally posted by Grn96Z
Chris, I know im a little late here, but you think I can still get in on this! I just fell into some money and wouldnt mind giving it to you :D

If you can contact me at 1-800-432-3379 ext 110, I'll see what I can do for you.

Thanks
Chris

Hey Chris,
I just left you a message...... call me when you get back in the office, I prolly missed this GP, is there another one coming up?

BTW Chris...my headers arrived a few days ago and I must say that I'm sad that they're going to be mostly hidden. They're just plain gorgeous... :bow:

http://www.classicgaming.com/vcoleco/96ta/misc/jethotlts01.jpg
http://www.classicgaming.com/vcoleco/96ta/misc/jethotlts02.jpg

(NOTE: The Fel-Pro gaskets and ARP bolts seen in the pictures were purchased separately.)

Lookin' good! Chris check your email! :D

Damn! I need to check this forum more often. Any chance of still getting the gp price or am I stuck until next time? I'm trying to get rid of the FLP's I have on the car now, and I think the Jet Hots would be a nice replacement. My only concern, how's the plug access??

EDIT: I just saw a post lower down about fitment issues. Will I have a fitment prob with my Spohn T/A or the M6 tranny mount????

Originally posted by snksknr94
Damn! I need to check this forum more often. Any chance of still getting the gp price or am I stuck until next time? I'm trying to get rid of the FLP's I have on the car now, and I think the Jet Hots would be a nice replacement. My only concern, how's the plug access??

EDIT: I just saw a post lower down about fitment issues. Will I have a fitment prob with my Spohn T/A or the M6 tranny mount????

Dang, same thing here, there was nothing going on in the forum it seemed like forever, now i missed this...crap i want to replace my hooker lts

Any life left in this??? I may be able to use 2 sets here real soon.
I know I am a day late and a dollar short.........story of my life....:rolleyes:

call chris and see what he'll do for you. i had actually talked to him earlier on about a money problem I had so he sold them to me for close to the GP price. oh course theres always a chance you can start another one.

i want to be in the next group purchase. i'm ready if anyone else is going to join.

Originally posted by rob96TA
i want to be in the next group purchase. i'm ready if anyone else is going to join.

Hey Rob, start a new thread in this forum for "3rd Jet-Hot LT gp?". Maybe you'll get some more bites that way. Just a thought buddy! :)

Originally posted by BitCypher
Hey Rob, start a new thread in this forum for "3rd Jet-Hot LT gp?". Maybe you'll get some more bites that way. Just a thought buddy! :)

Sorry, I have been out of the office a few days. I would realy like to start another GP right now, but I'm out of stock of the LT1 headers without the emission tubes. We will be receiving a new inventory mid August. If anyone would like to pre order, please email me your name,address and phone number. Also what year car you have and what headers you wanted. I will contact you as soon as the headers are in and before I start a new GP.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

Jet Hots; count me in as of 7-29-03

Wondering about the "tube" option ? Is that shown on the Jet Hot website ?

[QUOTE]Originally posted by JetHot Coating
[B]I would realy like to start another GP right now, but I'm out of stock of the LT1 headers without the emission tubes. [QUOTE]
That's becasue I got the last set!!!!!!!!:D :D