|
||
Best/safest way to remove sticker on rear bumper?newbielt1 04-06-2002, 02:37 PM The previous owner had placed a parking permit sticker on the rear bumper and I want to remove it, but I don't know what to in order to get it off. Which way would it be safest for the paint and ease of removal? Any solvents of some sort? Thanks guys. ------------------ 1994 Red Z28 M6 Borla Cat Back SLP CAI Pro 5.0 Short Shifter W.W. Super Style Wing dffishman 04-06-2002, 02:48 PM you may want to try using a blow dryer,use it to heat the sticker up let it get warm peel a corner then apply heat under the sticker as us slowly peel it back , let the adhesive get warm,i used this method to remove 4x4 stickers off of the side of my truck,good luck dffishman mdorish 04-06-2002, 06:15 PM After you remove the sticker with a hair dryer/heat gun,use some type of adhesive remover (I like 3M General Purpose Adhesive Remover for this as well as bugs,tar,etc). Mike http://web.camaross.com/bb/cool.gif ------------------ 1995 Flame Red Trans Am M6,3.42 (Factory Gear),T-Tops,Black Leather. K&N FIPK,Comp Cams Airfoil,98+ Taillights,GTS Foglight Blackouts newbielt1 04-07-2002, 04:22 AM Thanks for the input guys. Will the adhesive remover harm the paint on the car? Thanks again. ~~Wes [This message has been edited by newbielt1 (edited April 07, 2002).] mdorish 04-08-2002, 07:35 PM No, 3M (and other)adhesive removers are designed for automotive applications.As long as you use it with a soft,clean towel and wash and wax the affected area after you remove the adhesive,you'll be fine.You may notice some slight-moderate difference in the shade of the paint under the sticker,depending on how long it was on,exposure to sun,etc. Mike http://web.camaross.com/bb/cool.gif ------------------ 1995 Flame Red Trans Am M6,3.42 (Factory Gear),T-Tops,Black Leather. K&N FIPK,Comp Cams Airfoil,98+ Taillights,GTS Foglight Blackouts | ||