Show and Shine / Paint and Body Care Washing, polishing, detailing, paint care, etc.

Car drying tools

Thread Tools
 
Search this Thread
 
Old Mar 8, 2002 | 11:01 PM
  #1  
whuzizname's Avatar
Thread Starter
Registered User
 
Joined: Apr 2001
Posts: 82
Question Car drying tools

What's best for preventing scratches during drying:

1. Genuine chamois?

2. Fake chamois? (I saw one which is from the same manufacturer of the genuine chamois but for 1/4 the cost and claims not to scratch)

3. 100% cotton towel?

4. One of those "rubber California" squeegees? (or whatever they're called)

THANKS

------------------
Red 2002 Trans Am WS6
Red 1994 Probe GT
Red 1986 Fiero 2M4
Member, Michigan Fiero Club (www.michiganfieroclub.org)
Old Mar 8, 2002 | 11:04 PM
  #2  
Mad_Ice's Avatar
Registered User
 
Joined: Jun 2001
Posts: 83
From: Naperville, IL
Post

The absorber! Works great and if you ring it out often you won't have any water at all left on the car.

------------------
Mad_Ice
Old Mar 8, 2002 | 11:30 PM
  #3  
whuzizname's Avatar
Thread Starter
Registered User
 
Joined: Apr 2001
Posts: 82
Question

What's "the absorber"?

Also, I'm mostly interested in minimizing paint scratches..far more important than getting every drop of water.
Old Mar 9, 2002 | 07:16 AM
  #4  
Kevin V 2002 SS's Avatar
Registered User
 
Joined: Jun 2001
Posts: 882
From: Louisville, KY
Post

I use an electric leaf blower to blow the water off, then a 100% cotton towel (bought from KevinSS) to complete the drying. I also use Gerber flat baby diapers.

------------------
Kevin Villier, 2002 SS #186 - 6M with Hurst and "short-stick", TT, navy blue, chrome SS wheels, Bilstein suspension, SS grill, STB, SLP loudmouth, Direct-Flo lid with Holley filter and Mallory polished MAF ends.

Louisville, KY
Old Mar 9, 2002 | 09:24 AM
  #5  
MikeLS's Avatar
Registered User
 
Joined: Dec 2000
Posts: 1,564
From: Memphis, TN
Lightbulb

Believe it or not, you can actually get the car 80% free of water with the water hose itself. After washing take off the nozzel and let a steady stream of water flow across each panel at a very low angle. Most of the water will literally sheet of leaving only a few spots on each panel to clean up.

I use the Absorber and a Water Blade also as needed. All are perfectly safe IMHO, or I wouldn't use them.

------------------
*Mike's 1992 Camaro RS 25th Anniv.*
Dark Red Metallic (ext.) / Flame Red (int.)
Flowmaster Crossflow, K&N, 20% 3M Panther Black Tint
JL Audio 3 10", PPI PC2100, Kenwood eXcelon KRC-953H/U, Kenwood / Pioneer speakers
ZAINO! - Special Thanks to Sal Z
Metal \M/
Old Mar 9, 2002 | 11:37 AM
  #6  
mdorish's Avatar
Registered User
 
Joined: Nov 2000
Posts: 24
From: Kennedy Twp PA USA (Pittsburgh Suburbs)
Thumbs up

I use a California Water Blade and some 100% Cotton Towels,aided by a little compressed air to blow out the cracks!

Mike

------------------
1995 Flame Red Trans Am M6,3.42 (Factory Gear),T-Tops,Black Leather. K&N FIPK,Comp Cams Airfoil,98+ Taillights,GTS Foglight Blackouts
Old Mar 10, 2002 | 02:16 PM
  #7  
JeremyKweens's Avatar
Registered User
 
Joined: Jan 2001
Posts: 283
From: Esterhazy,Saskatchewan,Canada
Post

I use the water blade, seems to work really well. Anything else that is left I just used a cotton towel.

------------------
Red 1995 Camaro Z28

6 speed, T-tops, K&N FIPK, Mac crank pulley, SLP "Loudmouth" exhaust, red street glow(undercar kit), SS hood, blackouts all around

Best 1/4 mile: 14.28 @ 103.9 (achieved at 2250ft elevation and on severely worn tires)
Old Mar 10, 2002 | 02:40 PM
  #8  
97 RedSS's Avatar
Registered User
 
Joined: Aug 2000
Posts: 1,071
From: Dallas,TX
Post

Leaf Blower all the way 100% sure way not to scratch your car up!

Cody

------------------
97 30th Anniv Camaro SS #2374~ Bright Red,M6,Pro 5.0,Torsen Diff.,Oil Cooler,LT4KM,Ported LT1 Heads(GTP),GTP Custom Cam,Comp. Magnum 1.6" RR's,Chromoley Pushrods,Edelbrock Double Roller,Meziere,52MM BBK TB,Hooker LT's w/ Custom 3" Y-pipe,NGK TR55's,BMR STB,SLP CAI,OBD1,30# Inj.,OBD1PCM,stock 3.42's,stock clutch

My SS

E.T.F.A East Texas F-Body Assoc.

-Kiss my SS-
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jayblev95
Track Kill Stories
3
Jan 15, 2015 07:48 AM
cmdeshon
Parts Wanted
1
Dec 16, 2014 07:58 AM
pologreen97z
LT1 Based Engine Tech
0
Dec 2, 2014 10:42 AM
USAirman93
General 1967-2002 F-Body Tech
4
Nov 24, 2014 03:37 PM
97 RedSS
LT1 Based Engine Tech
11
Jun 10, 2003 07:58 PM




All times are GMT -5. The time now is 06:13 PM.