lt1car
06-04-2003, 01:46 PM
Well im going to start collecting my parts now for the 355 im doing this winter. I want a motor to withstand 150-200 shot of nitrous. Im doing the 355 with forged pistons eagle rods.
Basically how would you set it up. Please include a parts list.ie you dont need part numbers just tell me how you would do it.
I want to try in learn from other peoples mistakes on these. I want a strong forged bottom end for n20.
Also should I mill the heads? If so how much and what headgasket to use.
Thanks!
Joe
dreamer1q
06-04-2003, 02:07 PM
WAY TO MUCH TO TYPE. We will chat at the next event your at. Like St Ignace in 3 weeks. I did what your talking about this past winter.
Q
lt1car
06-04-2003, 02:25 PM
LOL
Well im thinking this so far.
Bottom End:
I'd go with TRW forged pistons
Eagle forged H-beams
stock crank
Heads:
Machine shop 3 angle valve job.
Porting and polishing by me(got some stuff on how to do a good buget port equal to a stage II.
1.6 rockers.
Valve size?
Block:
Using my stock lt1 block
Bored .030 over
Balanced
Splayed 4 bolts?
Anything else?
I know im missing tons of stuff. Just let me know. I want to get a master parts list going.
Also if you had part #'s that would help.
I just want to start collecting this stuff off of ebay asap.
Joe
dreamer1q
06-04-2003, 02:36 PM
Get a ZZ4 crank, they are forged and cheap.
Q
2094you
06-04-2003, 06:09 PM
i have a set of 94 lt1 heads with all kinds of head work done bowl work ported and polished
bigger springs 610lift
i have a nos custom grind cam and 1.6 crane goldseries RR. 540 lift.
will sell all in pakage deal on motor the car went 13.50 with a 125 shot the car went 11.80
make offer
AutoRoc
06-04-2003, 06:25 PM
I have a set of forged Weisco .060+, 3.75", 6" rod pistons for sale new in box:D roughly 9.5:1 comp. Thermal coated on top Dry Film on the skirts, pins, rings, locks... lemme know if you want more cubes.
lt1car
06-05-2003, 02:44 PM
Originally posted by 2094you
i have a set of 94 lt1 heads with all kinds of head work done bowl work ported and polished
bigger springs 610lift
i have a nos custom grind cam and 1.6 crane goldseries RR. 540 lift.
will sell all in pakage deal on motor the car went 13.50 with a 125 shot the car went 11.80
make offer
No thanks. Im using my own heads and going with a different came. Thanks for the offer.
Still looking for someone that can let me know some parts.
ROADRAGE
06-05-2003, 04:53 PM
Originally posted by 2094you
i have a set of 94 lt1 heads with all kinds of head work done bowl work ported and polished
bigger springs 610lift
i have a nos custom grind cam and 1.6 crane goldseries RR. 540 lift.
will sell all in pakage deal on motor the car went 13.50 with a 125 shot the car went 11.80
make offer
You should never EVER admit that again