|
||
Cheap source for..JordonMusser 05-27-2003, 10:07 PM I need a 1/2 NPT inlet, 3/8th outlet dist block for my fuel sys. I actually need 2 of them. Russell wants $30 a pop, anybody know where I could get one cheaper?? if I had more time, I would make my own! WS6 TA 05-28-2003, 03:47 AM I got a few blocks of aluminum at the scrap yard and have been making my own stuff like that on my drill press... just cut the appropriate chunk off, drill it, tap it... done... takes about 30min if i take the time to polish it. I think it took me 45min to make the FPR body/block for my brother's car :p Tech 05-28-2003, 06:34 PM Originally posted by WS6 TA I got a few blocks of aluminum at the scrap yard and have been making my own stuff like that on my drill press... just cut the appropriate chunk off, drill it, tap it... done... takes about 30min if i take the time to polish it. I think it took me 45min to make the FPR body/block for my brother's car :p So you're saying you'll make Jordan a couple? :D JordonMusser 05-28-2003, 11:07 PM thats seems to be what I am hearing ;) EDS Z28 05-28-2003, 11:22 PM I have the Russell one on my car. It is a billet aluminum anodized piece. I don't think you can find one cheaper than that with equal quality. Summit or jegs has one, but it is a bare casting and is like $20. | ||