Pix of c2000ws6's Engine Bay with Relocated Coil Packs

Charlie just had his Heads and Cam installed recently and had Whistler (Targa Top Z28) paint his coils packs and relocate them:cool:


Instead of moving them to the firewall, Chris fabricated a couple of plates out of raw Carbon Fiber and mounted them directly onto the Fuel Rails:cool:



Here are a few pix I took at the FUEL SLUT (www.fuelslut.com) meet last night:


Engine Bay from Front (http://www.fuelslut.com/hosting/uploads/charlieheadonengine.JPG)

Passenger Side Coils (http://www.fuelslut.com/hosting/uploads/charliepasssengercoil.JPG)

Driver Side Coils (http://www.fuelslut.com/hosting/uploads/charliedrivercoils.JPG)

Another Pic of the Driver side Coils (http://www.fuelslut.com/hosting/uploads/charliedrivercoils2.JPG)

Shot from Driver Side (http://www.fuelslut.com/hosting/uploads/charlieengine.JPG)

Engine From Right Side (http://www.fuelslut.com/hosting/uploads/charlieenginefromright.JPG)

Closeup of Coils and Carbon Fiber Mount (http://www.fuelslut.com/hosting/uploads/charliecoilcloseup.JPG)






Rick

Looks really good. Need to trim some engine/fuel rail covers to cover the intake. Just leave the coil packs sticking out like they are now. Get carbon covers and switch the wires to red.

:thumb:

You aren't kiddin wraith! What would be the SHIZNIT!

-Mike

Very trick!!!


-Mike

Hey!.... That looks familiar!


That car was my garage ornament last month! :)

looks HOT