firstgen 08-06-2002, 07:21 PM The new dragstrip date will be Thursday, August 22nd, gates open at 6:30pm and we'll start running at 7pm until 10pm. Cost is $30 per car (if we get a good turnout less) Spectators are free. EVERYONE WELCOME (This means any make/model car).
Milan dragway is the place.
Last time I was there running there was no wait, you could get as many runs in as you could. http://web.camaross.com/bb/smile.gif
You want to get some times or work on getting bugs out this is it.
Sponsored by the Eastern Michigan Camaro club racing division.
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
[This message has been edited by firstgen (edited August 06, 2002).]
94_formula 08-06-2002, 07:57 PM count me in!
AutoRoc 08-06-2002, 08:08 PM It's on the calendar for sure!! It would be dan cool if i could get a gear in this car...grrr
------------------
Denny Villemure
1989 Camaro IROC-Z Convertible, 305 TPI, 2.73 Gear, Flowmaster 2 chamber. 15.60 on motor, 14.20 on a 75 shot from NX. Woo hoo!
www.denny.cz28.com (http://www.denny.cz28.com)
94_Z28_ragtop 08-06-2002, 08:40 PM Ha ha! I have to say I'm shocked the Eastern Michigan Camaro Club is having a track day. They were trying to get me to set these up last fall but there didn't seem to be a whole lot of interest. Work got real busy and on top of that I am moving in a couple months so I dropped out of the club. Great group of people, I just didn't have the time this year.
Good luck with the event! I might try and make it out.
------------------
-Scott
2002 Camaro Z28 M6 - Cutout, Holley filter, SLP lid, ported MAF ends, FTRA, BFG DR's. No weight reduction!
With mods (@2000 miles): 12.934 @ 111.12 w/ 2.133 60 ft on Eagle GS-C's
Bone stock (@1300 miles): 13.467 @ 105.37 w/ 2.149 60 ft
94 Z28 Convertible A4 - Stock TB, intake, heads & short block! No weight reduction! Stock suspension (except LCA's)!
Best 1/4: 12.911 @ 104.49 w/ 1.81 60' (http://harlan.sketchy.net/video/Aaron_vs_Scott.mpg)
1990 Plymouth Laser RS Turbo - FWD, M5, ported head, 2.5" turbo back w/cat, K&N in modded intake can, Nitto DR's.
13.752 @ 101.51 w/ 2.227 60' @ 17 psi
94_Z28_ragtop 08-06-2002, 08:42 PM <font face="Verdana, Arial" size="2">Originally posted by AutoRoc:
It's on the calendar for sure!! It would be dan cool if i could get a gear in this car...grrr</font>
It needs more than a gear, Denny! http://web.camaross.com/bb/biggrin.gif http://web.camaross.com/bb/tongue.gif
Count me in! I want to see what the 4L60E will do. Am I missing something, isn't August 22nd a Thursday?
------------------
Brian Falzon
10.54 @133.8 MPH
with a T56
No runs with the new 4L60E
firstgen 08-06-2002, 11:40 PM <font face="Verdana, Arial" size="2">Originally posted by Zone:
Count me in! I want to see what the 4L60E will do. Am I missing something, isn't August 22nd a Thursday?
</font>
Yup. My mistake, all fixed. http://web.camaross.com/bb/smile.gif
I was looking at July, heh
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
AutoRoc 08-06-2002, 11:50 PM <font face="Verdana, Arial" size="2">Originally posted by 94_Z28_ragtop:
It needs more than a gear, Denny! http://web.camaross.com/bb/biggrin.gif http://web.camaross.com/bb/tongue.gif</font>
Yeah! It needs to take a **** in your mouth!! http://web.camaross.com/bb/mad.gif hahahahaha
------------------
Denny Villemure
1989 Camaro IROC-Z Convertible, 305 TPI, 2.73 Gear, Flowmaster 2 chamber. 15.60 on motor, 14.20 on a 75 shot from NX. Woo hoo!
www.denny.cz28.com (http://www.denny.cz28.com)
IrocSS85 08-07-2002, 12:13 AM im gonna try to make it too. heads are on, but got the rest of the crap to do still to finish it up. cant wait. chris
------------------
1986 Iroc Z
355, ported camel hump heads,750 holley, 700r4, 10.5 compr., forged flat tops, solidcam .501I .510E, 4gen rear w/3:73 posi, girdle, and disc's, Edel. torker II, shift kit, 3500 stal, hedmann LT. headers, 4 gen seats, man. strg., lt1 starter, alum. w/p, msd 6al, coil, dist., mallory wires.13.34 @102mph best w/that combo. have trick flow heads and tighter conv. to put in currently.
1995 z28,SS Hood, Iroc style spoiler, tints and black outs, 700r4,2400 act. stall speed,B&M hammer shifter, 17" budnick trilogy III wheels, 275/40 ZR17, 160 stat, man. cooling fan sw., homemaid CAI,1LE elbow, hypertech airfoil, t.b.bypass,!cat, flowmaster, !maf screen, relocated batt., 1LE front l.c.a.s', poly trans and torq.arm bushings, MSD 6AL, custom program, p&p maf, accel coil, and under drive pulley
mods that i have, just not on car yet:
msd wires, edelbrock mid. headers, edelbrock rpm catback
Eddie95Z28 08-07-2002, 02:19 PM I'll be there. I look forward to meeting some new people from the area.
------------------
Eddie R. "Much clown luv!"
I have some mods too!
Yahoo: CrackerBalls95
AIM: CrackerBalls95 ICQ: 1651571
99SilverSS 08-07-2002, 10:51 PM Cool thats about a week before fall classes start so I'm game. I may have 1-3 guys with me. One has a 97 Cobra. Is that o.k. or is it only Camaro/f-bodies?
------------------
2002 Z28 white/neutral A4 3.23
13.33 @ 104.7 - 650 miles
286rwhp/311rwtq - 1300 miles
STOCK for now!
Gone but not forgotten,
1999 Silver SS 6M #3956
1997 Black Z28 A4 3.23
------------------
Ryan S.
BLU98Z28 08-07-2002, 11:16 PM Hopefully I'll have my torque converter and shift kit installed by then. If not I'm still gonna try and make it.
------------------
98 Z A4
STOCK NUMBERS
289.7 HP
312.4 TRQ
13.378 Best Time
firstgen 08-08-2002, 08:50 AM Everyone is invited. http://web.camaross.com/bb/smile.gif
Doesn't matter what you drive.
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
firstgen 08-09-2002, 02:40 AM My cars all fixed. I'll have her out there for sure. http://web.camaross.com/bb/wink.gif
I do need a new carburator though, and still need to get my springs and new front shocks in.
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
firstgen 08-10-2002, 04:33 PM ttt
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
ltlhomer 08-20-2002, 01:01 AM I might be there as well...Too bad all you guys will smoke me! Doh!
------------------
94 Quasar Blue z28 A4 3.73's, pcmforless programming, shift kit, optima 16" rims, K&N FIPK, cat removed, airfoil, msd superconductor wires, accel coil, ac delco platinum plugs (.050" gap), 1le elbow, 160 deg. thermo, 1st gear select, nitto 555r's, fan switch
Best Rxn: .503 Best ET: 13.680 @ 101.77 on bad 2.064 60ft.
Rich_z28 08-20-2002, 01:05 AM I'll be there so Homer has someone to run with. http://web.camaross.com/bb/wink.gif
------------------
~Rich
95 Arctic White Z~28
Borla, Quictime Electric Cutout, MAC Headers/Y-Pipe/Off Road Pipe, Granatelli MAF Sensor, MSD Super Conductor Wires, Bosch Platinum +4 Plugs, Air Foil, K&N, Trans Go Shift Kit, Digital FP Gauge, Autometer Trans Temp & AF Ratio Gauges, LT1 Scanmaster, SLP Fan Switch, 160 stat, Chrome ZR1 Rims, Nitto 450s, Z~Roc Hood.
Next: Heads, Cam, Intake and Throttle Body!
taner 08-20-2002, 09:43 AM FIRSTGEN,
Do u know if they are going to prep the track?
maybe i will give them a call to see if they plan on it.
thanks
taner
firstgen 08-20-2002, 03:23 PM Track will be prepped I am told.
------------------
1967 Camaro SS - 468 BBC modified
------------------
1967 Camaro RS - 327 stock
------------------
1969 Camaro Z/28 - DZ302 stock
------------------
2000 Ducati 996
------------------
Member of the Eastern Michigan Camaro Club
ltlhomer 08-21-2002, 11:29 AM I'll be there and I'll have my "stage 1" weight reduction done. That's the ricer way of sayign I ripped out the seats, spare, and jack. :-) See ya guys there!
------------------
94 Quasar Blue z28 A4 3.73's, pcmforless programming, shift kit, optima 16" rims, K&N FIPK, cat removed, airfoil, msd superconductor wires, accel coil, ac delco platinum plugs (.050" gap), 1le elbow, 160 deg. thermo, 1st gear select, nitto 555r's, fan switch
Best Rxn: .503 Best ET: 13.680 @ 101.77 on bad 2.064 60ft.
|
|