irocz383

I have a few logs done and I've been having a hell of a time getting the guy to tune the car perfectly.

Would anyone here be willing to take a look at some A/F logs and share their opinion? I cant host them at the moment so if anyone would be able to take a look I'll email them to you.

Thanx in advance!
-Ken

kandied91z

ask around at thirdgen.org too, alot of guys have helped me over there as well as here!

good luck with it, tunning has been the worst thing i've ever dealt with as far as the time it takes to get it right.

onefastgta

Put them up, what kind of problems are you having?

irocz383

well.... at first I had just about every problem you could think of. Now its a matter of getting the A/F ratio were it should be. It was runnning too rich and it was washing down the cylinder walls, thus the rings have not set properly. Now I'm burning oil and its still on the rich side. I have a slight surging, only sometimes, and I'd like to make the A/F log look a little more smooth. Its spikes quite a bit right now.

irocz383

okay... I think this link should work. Finally got to host it somewere.

Try this (7 pages in total)

(You may have to right click and save image to disc, then open it from there.)

onefastgta

Linky no worky.

onefastgta

Just send it to me, I have the same combo you do, shouldn't be that hard to figure out.

irocz383

Thanx man! Mail is sent!

onefastgta

Just send me the .bin file, it would be easier that way.

irocz383

I didn't do an ECM log... I just did a wide band O2 log from a Dyno at a friends shop.

I just hooked it up and drove around.

onefastgta

Do you burn your own chips? Do you know what the .bin file is?

onefastgta

I can read it now. Sent you an email.