Scoggin Dickey Crate Motor Springs

Reply Subscribe

Thread Tools

Search this Thread

04-30-2009, 03:48 PM

wild28

Registered User

Thread Starter

Join Date: Jul 2008

Posts: 6

Scoggin Dickey Crate Motor Springs

About 5 months ago i put a scoggin dickey sd360tpi crate motor in my 87 IROC. Everything for the install went reasonably well. Anyway now Ive got 5000 miles on the car and I have a broken valve spring. I read a bunch of posts in the past about the spring problem on this motor and called SD and they said that they had resolved the problem and it was no longer an issue. Obviously it still is. Anyway Ive decided to just replace all the valve springs. What would be a good choice for springs that will hold up. Its got vortec heads with 1.6 rockers.

04-30-2009, 08:40 PM

86camaro383

Registered User

Join Date: Sep 2008

Location: NY

Posts: 88

post up the cam specs............

05-03-2009, 04:28 PM

wild28

Registered User

Thread Starter

Join Date: Jul 2008

Posts: 6

218 224 12 degree .525 lift

06-04-2009, 06:18 AM

OrangeLS3

Registered User

Join Date: May 2009

Location: Stafford, Va

Posts: 1

It's a HOT cam.

I'm a little late posting here but I have the same engine. Just curious, what size injectors and TB are you running and who programmed your computer?