Got My CAM!
#1
Got My CAM!
I got my Stage II Comp CAM Installed last week. I am just posting now because I wanted time to enjoy the car before I posted.
I dropped my car off at SNL Performance Wed the 2nd of March. Let me say that SNL Performance has a very nice facility with very knowledgeable and professional staff. They were very nice and did a very nice job on my car. When I arrived at their shop they imediately put my car on the Dyno for a baseline so they and I would know the gains from the CAM.
I did not get the same numbers on their dyno that i had gotten on the dyno from the shop that originally tuned my car. I know there is a difference between dyno's so I chalked it up to that. They did not leave it at that though. They went into the tune and check it out and showed me where the problems were.
I appears that the other tune was 413 RWHP and 401 RWTQ at Wide Open Throttle. I was tuned to get my max HP at 6200 RPM. They re-tuned my car before even doing the CAM and got me back up to 406 RWHP and 412 RWTQ. They would have kept trying but I told them that was good enough for a baseline. I loved their willingness to keep trying.
I was again surprised by their dedication when I was pulling out of the parking lot one of their mechanics was pulling in to their shop and soped me to ask how I liked it. I was even more surprised when I got 60 miles down the road and was called by Steve, The S in SNL Performance, and he asked me how I was enjoying it.
Their Customer Service is off the chart. I highly recommend them if anyone is looking for a great shop that truely cares about you and your
car.
Here is the video.
[autostream]http://autostream.com/camaroz28/?page_type=firebirdplayerthumbnail&framepage=465&t ransactionid=1299505977-1501138138&posted_by=CamaroCowboy_camaroz28.com[/autostream]
Here is the dyno graph.
I dropped my car off at SNL Performance Wed the 2nd of March. Let me say that SNL Performance has a very nice facility with very knowledgeable and professional staff. They were very nice and did a very nice job on my car. When I arrived at their shop they imediately put my car on the Dyno for a baseline so they and I would know the gains from the CAM.
I did not get the same numbers on their dyno that i had gotten on the dyno from the shop that originally tuned my car. I know there is a difference between dyno's so I chalked it up to that. They did not leave it at that though. They went into the tune and check it out and showed me where the problems were.
I appears that the other tune was 413 RWHP and 401 RWTQ at Wide Open Throttle. I was tuned to get my max HP at 6200 RPM. They re-tuned my car before even doing the CAM and got me back up to 406 RWHP and 412 RWTQ. They would have kept trying but I told them that was good enough for a baseline. I loved their willingness to keep trying.
I was again surprised by their dedication when I was pulling out of the parking lot one of their mechanics was pulling in to their shop and soped me to ask how I liked it. I was even more surprised when I got 60 miles down the road and was called by Steve, The S in SNL Performance, and he asked me how I was enjoying it.
Their Customer Service is off the chart. I highly recommend them if anyone is looking for a great shop that truely cares about you and your
car.
Here is the video.
[autostream]http://autostream.com/camaroz28/?page_type=firebirdplayerthumbnail&framepage=465&t ransactionid=1299505977-1501138138&posted_by=CamaroCowboy_camaroz28.com[/autostream]
Here is the dyno graph.
#2
Re: Got My CAM!
Thread
Thread Starter
Forum
Replies
Last Post