Mucker15

Shopped around for gauges for my car. To buy new, found it from GMpartsdirect although to find the cheap prices you need to go into the catalog which brings you to a separate website. The site is confusing and it seems a but shady to me but thats just my opinion the prices were super cheap shipping is very high though.There are plenty of options new if you shop around. Wound up finding the guages from a brother from the Camaro community. As people modify thier cars more and more parts like this will be available so I suggest checking the local market place and classifieds of the national and the local Camaro websites. After a lot of research and the right parts this was a simmple install. Im hoping to list every important aspect of the project here to make it easier for the next guy who runs into my problem.
***********UPDATE:92233047# PARTS NUMBER**********
FACTS:
1.) AUXILARY GAUGES FROM GM ARE JUST PLUG AND PLAY
2.) IF GAUGES ARE PURCHASED USED OUT OF A 2SS OR 2LT YOU WILL NEED TO USE THE HARNESS LISTED HERE OR HAVE A CUSTOM ONE MADE.
3.) THERE ARE TWO DIFFERENT PART #S FOR A6 AND M6 CARS parts list
4.) THESE DONT NEED TO BE ACTIVATED BY A DEALER

PARTS LIST:
SMALL PLASTIC PRY BAR
AUXILARY GUAGE CLUSTER
CONSOLE COVER A6
109139 Quad Pack Data Harness – 2010-2011 Camaro
available @
http://www.casperselectronics.com/store2/index.php

Mucker15

now just put everything back together and enjoy!

FOR THOSE OF YOU WHO GOT THE AUX GAUGES FROM GM THIS IS A BIT SIMPLER


VERY SPECIAL THANKS TO KENDELL CHIN (DOC) MARK BOLT AND DARTH MARTEL, GOOD TO KNOW THERES STILL GOOD PEOPLE OUT THERE

Jameslt1TA

I just got a 1ss and was wondering if this could be done. Looks nice thanks for the write-up. How much did it run ya?

Mucker15

I got the guages used from a 2 ss shopped around and found them for sale and offered 200$ and got them then the harness was 35$

glad it helped

edklee

Thanks Mucker, This is next weekends project for my RS. This will be easier than I thought thanks again.

Mucker15

no problem Ed glad its a help

edklee

Mucker Thanks, I just got them put in and they look Great it only took me 20 minutes!! Your step by Step process made it very easy!!